changed the lifters in my buddys 5.0 check what we found
#1
5th Gear Member
Thread Starter
Join Date: Mar 2006
Location: Massachusetts, New Bedford
Posts: 3,035
changed the lifters in my buddys 5.0 check what we found
ok so i went to my buddys house to change his lifters cuz he recently had surgery on his arm and couldnt do it by himself. it was making a horrific noise from the drivers side head. anyways i took the upper and lower off and the valve cover to find this.
see how recessed that back lifter is?
its hard to see but the cam is kinda rough
we just replaced the lifter and put it back together. it runs good for now but for how long? haha
anyone have n e idea what would have caused that? the lifters are not very old. maybe like a year or so...
see how recessed that back lifter is?
its hard to see but the cam is kinda rough
we just replaced the lifter and put it back together. it runs good for now but for how long? haha
anyone have n e idea what would have caused that? the lifters are not very old. maybe like a year or so...
#6
5th Gear Member
Thread Starter
Join Date: Mar 2006
Location: Massachusetts, New Bedford
Posts: 3,035
BBGay anything is useless. me and my buddy have had nothing but problems with all of their stuff.
the flanges on our h-pipes kept falling off the "ball" so we had to tack weld them on. my bbk tb kept sticking and made a high pitched whine so i bought an accufab (love it btw). and then his tb does this and the bbk cai doesnt fit on right either..
the flanges on our h-pipes kept falling off the "ball" so we had to tack weld them on. my bbk tb kept sticking and made a high pitched whine so i bought an accufab (love it btw). and then his tb does this and the bbk cai doesnt fit on right either..
#8
BBGay anything is useless. me and my buddy have had nothing but problems with all of their stuff.
the flanges on our h-pipes kept falling off the "ball" so we had to tack weld them on. my bbk tb kept sticking and made a high pitched whine so i bought an accufab (love it btw). and then his tb does this and the bbk cai doesnt fit on right either..
the flanges on our h-pipes kept falling off the "ball" so we had to tack weld them on. my bbk tb kept sticking and made a high pitched whine so i bought an accufab (love it btw). and then his tb does this and the bbk cai doesnt fit on right either..
#9
5th Gear Member
Thread Starter
Join Date: Mar 2006
Location: Massachusetts, New Bedford
Posts: 3,035
yea i have BBGay unequals and thy are starting to rust a little but not too bad. but thoes are the only decent products ive used. well the bolts are starting to rot.. (the ones the connect to the hpipe) the threads are falling off lol. kinda hard to take the hpipe off and on..