Hi everybody,
I got a 1990 GT as my first car, thing is it needs some work. It needed an AC support bracket(the one that bolts to the water pump), for lack of a better term, so I went to the junkyard and ended up pulling one off of a 90 Mark VII but it's too tall. Am I missing another piece or is it a different bracket altogether? I figured it would be the same since its the same year, engine, and I know other parts are interchangeable with the Mustang.
Any help would be appreciated.
-Nick

 

your talking about this one right???

http://www.latemodelrestoration.com/...racket-With-AC

anyone who dumps their AC and goes with this kit will have it laying around for cheap.

http://www.latemodelrestoration.com/...A-C-Eliminator

or if you dump your AC, you dont need the one your looking for, and that will relocate the ps pump to where the compressor was... just like a factory NON AC car

 

btw, i have that bracket.. and need the eliminator kit

i'd trade you for it if you really really want the AC and cant find the bracket for less than $40

i wanted to keep it, but probably will never go back to AC due to what it will cost me to do it. i need a compressor and switch to r134 and the whole bit

 

mark VII uses different brackets