I am converting my 1976 Ford Pickup to EFI that came from a 1989 Mustang. While putting the lower intake on I see there is a rather large hole at the rear that needs to be filled with a hose or something but I cannot find a picture of what actually goes there and where/what do I connect the other end to?

I am hoping someone here can help me out with a picture or two, or at least a good explanation of where this goes.

TIA,

Mark

 

Center of intake? Metal screen goes in hole, grommet next, then the pcv valve.

 

this ^^^

 

Thanks! Yes, it is right in the center of the intake - rear. Looks like a big hole for a pcv

Mark