first of all whats up people i see some changes in some peoples cars ... Well the time has come to start modding and fixing up my car again. For those that do not i know i have 9.1 to 1 cr 347. I was planning on getting a s trim now my question is will 42lb injectors be enough or just go to 60's. also i have a custom cam, but not sure how it will run with the sc. specs are 236 int/exhaust 608. lift and 110 lsa. I was told that my car would not run correctly with that cam and the sc is this true? my goel is to get 500rwhp. i do have a 255 intanke fuel pump thats about it. do i need to upgrade the fuel rails? oh and yes i do have the stock block 500 is all i want for now before i go to a r block and switch everything over. Thanks for any help guys

 

i made around 500 rwhp 494 with a 255 intake stock lines and fuel rails and my 42s were more then enough with my old combo

 

did you ever run the car as it sits??

 

took it to the track once. 17 inch wheel+ street tires= no traction big time. was not able to get on it until 3rd. 2.776 60! best 60 was 2.4 then went sideways a little in 2nd and 3rd. i will take it to the track again with slicks to get a few na passes before the SC.

 

so what were the times/traps speeds as such???

 

i was getting 13.3 to 13.8 from 104 mph to 109. car was getting no where and fast hahaha. there is a lot left in the car. if i can get my 1.7's like i use to i'm 100% sure low twelves will not be a problem. with a hard launch maybe 11's?

 

Why dont u worry about the suspension and some good tires before u consider buying a supercharger. Why have a butt load of horsepower if u can't get it to the ground?

 

yes yes yes im not a noob lol. getting slicks next week and as for suspension i got that pretty much down. mm lowers strange adjustable shocks subframes ect... the onyl reason i took my car out that day was because i had access to a trailor and said why not. went for s**ts and giggles. i knew the car was going to run horrible times..... now back to my question lol

 

ttt. where the cam guru's

 

bulletcams.com or camshaft innovations