Rear end question...
#1
Rear end question...
I got my 2011 GT used, no window sticker to be found. The dealer said he was 'pretty sure' it was a 3.73 rear end. Is there any way to confirm this?
(like running at a particular speed, seeing w/ the rpm is etc)
TIA
(like running at a particular speed, seeing w/ the rpm is etc)
TIA
#2
Although I don't have the answer myself, you'll have a response shortly I'm sure from Nuke around here, who I believe has a spreadsheet of RPM to speed comparisons that tell you what type of rear axle ratio you're running
#4
#6
The tag will tell you the gear ration on the differential. If for some reason there is no tag, if you have access to a lift the you can put a chalk mark on the drive shaft and spin the rear wheels, count how many times the rear wheel turn v the drive shaft.
#7
The easiest way to check the gear ratio would be to look at the window sticker online. If your car has optional gears they will be listed under Optional Equipment. Just replace ...... in the following link with your VIN.
http://fordlabels.webview.biz/webvie...=......&ref=VL
http://fordlabels.webview.biz/webvie...=......&ref=VL
#8
The easiest way to check the gear ratio would be to look at the window sticker online. If your car has optional gears they will be listed under Optional Equipment. Just replace ...... in the following link with your VIN.
http://fordlabels.webview.biz/webvie...=......&ref=VL
http://fordlabels.webview.biz/webvie...=......&ref=VL
#9
you can email crc@ford.com with your VIN and request a build sheet. They will send you, on nice 24lb paper, a sheet listing your build date, options, etc. It's pretty nice, and free.