Trunk lid and dynamat?

Reply Subscribe

Thread Tools

Search this Thread

Oct 9, 2006 | 05:02 PM

02DKBLUE

Thread Starter

1st Gear Member

Joined: Apr 2006

Posts: 76

Trunk lid and dynamat?

I have 2 Kicker L7 12's in my trunk, originally i bought 2 Dynamat Extreme Bulk Paks and did both doors completely, the entire trunk floor twice, rear deck (where back speakers go), all the framing for the back seat brackets, and also completely covered under the rears seats and half way up the wall on the sides around the window. All i have left, and pretty much all that rattles now, is the trunk lid. I have enough to cover the whole thing, but when i open my trunk i don't want to see that shiny Dynamat logo all over my trunk lid... i just don't see it looking good. I have been searching for a cover that i could put up there to cover it all up, possibly something with a "Mustang" or "GT" logo or something attractive like that. Do any of you guys know of anything like this? I've been searching and searching and i've found nothing. Any help is appreciated.

Oct 10, 2006 | 12:02 PM

ttocs

6th Gear Member

Joined: Feb 2006

Posts: 6,936

From:

RE: Trunk lid and dynamat?

you would probably have to make one. A little 1/4" mdf and some fiberglass, shouldn't be too bad and you can put what ever logo you want on it.

Oct 10, 2006 | 12:50 PM

gt96stang

5th Gear Member

Joined: Mar 2005

Posts: 3,689

From: Navarre, FL

RE: Trunk lid and dynamat?

These are for my 96, but they have some for your year..
CLICK HERE

Oct 15, 2006 | 07:02 PM

oakman

2nd Gear Member

Joined: Apr 2006

Posts: 379

From: Sugar Land, Texas

RE: Trunk lid and dynamat?

Quote:

ORIGINAL: 02DKBLUE

I have 2 Kicker L7 12's in my trunk, originally i bought 2 Dynamat Extreme Bulk Paks and did both doors completely, the entire trunk floor twice, rear deck (where back speakers go), all the framing for the back seat brackets, and also completely covered under the rears seats and half way up the wall on the sides around the window. All i have left, and pretty much all that rattles now, is the trunk lid. I have enough to cover the whole thing, but when i open my trunk i don't want to see that shiny Dynamat logo all over my trunk lid... i just don't see it looking good. I have been searching for a cover that i could put up there to cover it all up, possibly something with a "Mustang" or "GT" logo or something attractive like that. Do any of you guys know of anything like this? I've been searching and searching and i've found nothing. Any help is appreciated.

I am with you, I did the whole trunk but did not want to put it on the trunk lid because of the visuals. If you come with some custom job like ttocs suggests please post it so we can get some ideas. I really am not sure if I need it there anyway, I don't seem to hear a rattle.