Mach 1000 speaker problem
2nd Gear Member
Joined: Sep 2012
Posts: 477
From: California
Lots of ideas, tough to diagnose though.
Is there any sound coming out? are they stock speakers?
Have you checked the wires going into the speakers? through the door? or from the head unit?
Check them with a DMM if you can and see if they get voltage when the radio is on.
did someone change the fade/balance settings on your radio? check that one first...
If all the wires look good and the settings are correct, then you may have blown both speakers(rare, but possible). either way it sounds like you might want to get a new audio system soon.
Is there any sound coming out? are they stock speakers?
Have you checked the wires going into the speakers? through the door? or from the head unit?
Check them with a DMM if you can and see if they get voltage when the radio is on.
did someone change the fade/balance settings on your radio? check that one first...
If all the wires look good and the settings are correct, then you may have blown both speakers(rare, but possible). either way it sounds like you might want to get a new audio system soon.
Thread
Thread Starter
Forum
Replies
Last Post