Learned two things
Thread Starter
4th Gear Member
Joined: May 2008
Posts: 1,019
From: Houston, Texas
Learned two things
I learned two things this evening.
First, I finally found the time and figured out how to adjust my quarter window so that now when I close the door with the window up there isn't basically an over lap of the front window on the quarter window.
The second thing I learned is that adjusting the quarter windows can test your patience with lots of trial / error till you get it just right, LOL!
First, I finally found the time and figured out how to adjust my quarter window so that now when I close the door with the window up there isn't basically an over lap of the front window on the quarter window.
The second thing I learned is that adjusting the quarter windows can test your patience with lots of trial / error till you get it just right, LOL!
6th Gear Member
Joined: Dec 2005
Posts: 5,212
From: Hills of California
SO this adjust the 1/4 window's distance from the door window?
Right now I have a fairly large gap between the 1/4 window and the door window. The weather stripping barely makes a seal. is this what yours was doing?
-Gun
Right now I have a fairly large gap between the 1/4 window and the door window. The weather stripping barely makes a seal. is this what yours was doing?
-Gun
Thread Starter
4th Gear Member
Joined: May 2008
Posts: 1,019
From: Houston, Texas
Mine was the opposite...I didn't have a gap. My quarter window was too far forward and when you closed the door with the window up the top / back portion of the front window literally overlapped the quarter window by just a bit...less than 1/8 of an inch but enough to be a real pain.
Thread
Thread Starter
Forum
Replies
Last Post
treesloth
New Member Area
4
Sep 28, 2015 07:03 AM