Alignment (again)
Jan 24, 2009 | 01:09 PM
Thread Starter
Joined: May 2007
Posts: 8,158
From: AL
Alignment (again)
I never did align the mustang the first time. So I am finally going to align it. What do I need to correct the camber? Shims needed? Or am I talking about the wrong thing.
Jan 24, 2009 | 02:54 PM
Joined: Sep 2008
Posts: 1,839
From: Connecticut
On your 67 the caster/camber alignment is made by a combination of the lower arm eccentric (mounting bolt) and the strut rod.
Jan 24, 2009 | 02:57 PM
Joined: Jul 2008
Posts: 790
From: Arkansas
I would take it to a shop and have them do it because they have the right equipment to do it.
Jan 24, 2009 | 03:33 PM
Thread Starter
Joined: May 2007
Posts: 8,158
From: AL
I'm on the toe right now. I have everything in the range according to my readings. Except my toe.
Jan 24, 2009 | 04:07 PM
Thread Starter
Joined: May 2007
Posts: 8,158
From: AL
How do I rotate the Tie rod sleeve after loosening the bolts? Mine aren't moving at all.
Jan 24, 2009 | 04:55 PM
Thread Starter
Joined: May 2007
Posts: 8,158
From: AL
Finally got it. tightening up the tie rods now.
Jan 24, 2009 | 05:38 PM
Thread Starter
Joined: May 2007
Posts: 8,158
From: AL
Well I failed... Going to take it to an alignment place this week. I think I made it worse.
Jan 24, 2009 | 06:19 PM
Joined: Jul 2008
Posts: 790
From: Arkansas
I'm not gonna say I told you so, but I told you so.
Jan 24, 2009 | 06:22 PM
Thread Starter
Joined: May 2007
Posts: 8,158
From: AL
Just wanted to see if I could do it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
winner99
S197 Handling Section
3
Sep 30, 2015 07:04 PM
UrS4
S197 Handling Section
1
Sep 30, 2015 10:13 AM
Drastang
4.6L (1996-2004 Modular) Mustang
3
Sep 29, 2015 03:31 PM
marc954
4.6L (1996-2004 Modular) Mustang
2
Sep 29, 2015 11:18 AM
lincolnshibuya
V6 (1994-2004) Mustangs
1
Sep 24, 2015 10:46 PM
Alignment (again)
