would anyone happen to know where i could find a good vacum line diagram for a 1968 289?

 

If you find one, post it on here... could use one too.

 

Here's one on Ebay. Not to bad for 11 bux.
http://cgi.ebay.com/ebaymotors/1968-...QQcmdZViewItem

 

There is only one vacuum line if you have a standard trans and two if you have an auto. Should be pretty easy to figure out. What so you need to know?

 

I guess there could be more on a 68. The earlier stangs only have one.

 

I'm looking at my chilton's manual here, and I see several vacuum diagrams for 1968 mustangs, depending on your configuration (I would post scans, but that may violate copyrights and stuff like that):

1. 1968 289 and 302 2bbl, auto trans, with A/C
2. 1968 289 and 302 2bbl, auto trans, without A/C
3. 1968 289 and 302 2bbl and 302 4bbl with manual transmission

I could describe them in detail if you told me which one you needed.

And, yes they do have more than one vacuum line.

 

oh yes trust me, they def. have more than one line

thanks natedizzle, i'll let ya kno which one inparticular im needin.