About to do some work on the cowl and need to pull out the windshield but I dont have the tool to do it....Anyone willing to donate or sell one cause I cant seem to find it on ebay either.

Thanks

 

It's called a box cutter. Cut the rubber and pull the windshield out. The old rubbers should not be reused anyway. There is not a tool made for mustang windshields.

 

wanna bet ? Maybe not for mustangs specifically, but for windshield removal.

 

oh and here's a pic of one ...just in case you never seen one before.

[IMG]local://upfiles/19323/0EC01696521147F8AB470EFDD468A985.gif[/IMG]

 

Have to admit it never seen one of those before. Cool!

 

Like the man said. There is not tool SPECIFICALLY for Mustang Windshield removal.

 

I'll pass on something that worked for me. When I was having trouble scraping out the old rubber that was nearly solidified, I sprayed it with WD-40, let it sit for 30 - 45 minutes and it loosened it up enough that I’m not sure I even had to cut/scrape any more old rubber out. As I recall I think I just pushed it out from the inside. Don't know if it was just a fluke, but hey, it did help get my window out.

 

I have heard tell that a church key will work to get the chrome off.

 

Hey thanks guys...You're right its not specifically for mustangs and i'm sure a box cutter would work just fine. I have some of those around here somewhere ...ill give it a try...

Thank you

 

You'll have less of a chance of breaking your glass if you cut the rubber. It will just lift out then