Just finished installing a complete front suspension/steering kit and Shelby drop. still need to align. But the problem is the front drivers side is 1/2" lower than the passenger side. The 245/50/16 hit the wheel well on the drivers side when you turn. the tire on this side is 1/2" up inside the well. the other side does not appear to have a problem. although if you hit a bump, you would proably hit. any ideas? thinking of getting 225/50/16 for the front. The back is now one inch higher than the front. Get rid of the 1" lowering coils and go with original??? Thanks Joe

 

check how the spings are on the perches.... one might be spun a little