Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Anyone else have problems with mice????

Thread Tools
 
Search this Thread
 
Old Aug 15, 2006 | 01:19 AM
  #11  
Aux289's Avatar
Aux289
Thread Starter
 
Joined: Jul 2006
Posts: 46
From: MN
Default RE: Anyone else have problems with mice????

atomsk680, you obviously do not understand what I am trying to tell you. Yes, I have put on 200 miles, but AGAIN, NOWHERE did I state these 200 miles were put on IMMEDIATELY upon starting it up in the storage building after sitting for 8 years. You somehow assumed that. Re- read what you just highlighted. Does it say those 200 miles were put on straight out of storage? NO. It does say the 200 miles were put on after I cleaned out the drivers fresh air vent, and what I thought was all of the mouse nest out of that vent. Did you read my original post? If you would have, you would have seen the LONG list of things I was going to do, and did, before even starting it, much less driving it after sitting so long. You were/are worried about block damage, which I appreciate by the way, because of something you assumed.

I am done with this little misunderstanding, and hopefully you are as well. Can we now get back to the subject??????
Old Aug 15, 2006 | 01:24 AM
  #12  
atomsk680's Avatar
atomsk680
5th Gear Member
 
Joined: Dec 2005
Posts: 3,806
From: DFW
Default RE: Anyone else have problems with mice????


ORIGINAL: Aux289

atomsk680, you obviously do not understand what I am trying to tell you. Yes, I have put on 200 miles, but AGAIN, NOWHERE did I state these 200 miles were put on IMMEDIATELY upon starting it up in the storage building after sitting for 8 years. You somehow assumed that. Re- read what you just highlighted. Does it say those 200 miles were put on straight out of storage? NO. It does say the 200 miles were put on after I cleaned out the drivers fresh air vent, and what I thought was all of the mouse nest out of that vent. Did you read my original post? If you would have, you would have seen the LONG list of things I was going to do, and did, before even starting it, much less driving it after sitting so long. You were/are worried about block damage, which I appreciate by the way, because of something you assumed.

I am done with this little misunderstanding, and hopefully you are as well. Can we now get back to the subject??????
yes, you are right, you didnt say that, but you didnt say you didnt do that either, so i assumed the worst being you are a n00b, no offense. also i shouldnt have to go to other post's for a small bit of info like that. yes i am done with this misunderstanding
Old Aug 15, 2006 | 03:37 AM
  #13  
FuzzyDiceRule's Avatar
FuzzyDiceRule
5th Gear Member
 
Joined: Jun 2005
Posts: 3,315
From: San Diego, CA
Default RE: Anyone else have problems with mice????

lol, yay, they resolved. Got the mach from seattle, however it was owned in oregon, no dead mice, no smell, no nests, hopefully.
Old Aug 15, 2006 | 04:15 AM
  #14  
rmodel65's Avatar
rmodel65
Yukon Cornelius
 
Joined: Oct 2005
Posts: 11,812
From: deep in the heart of dixie GEORGIA
Default RE: Anyone else have problems with mice????


ORIGINAL: Soaring

I'm surprised you didn't mention them eating the spark plug wires. Yeah, when I stored mine for awhile, the little buggers ate my spark plug wires. Not any other wires, just the spark plug wires. I had several bowls of anti-freeze under the car, but after several months that dried up, so the relatives of the dead ones came back to take vengence.
with all that grain there was no need to lol
Old Aug 15, 2006 | 05:55 AM
  #15  
baddog671's Avatar
baddog671
6th Gear Member
 
Joined: May 2005
Posts: 5,736
From: MD/WV
Default RE: Anyone else have problems with mice????

No mice in mine, just bee's nest every so often in little corners...

a little off subject but somehow a cat crawled into a womans airfilter box the other day at work. She said the cat had been missing for 2 months...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
69Volunteer
Classic Mustang General Discussion
1
Sep 30, 2015 10:39 AM
Camster
4.6L (1996-2004 Modular) Mustang
6
Sep 26, 2015 08:33 AM
marc954
New Member Area
2
Sep 25, 2015 06:48 AM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
Sep 21, 2015 11:01 AM
Big Al's 03
Mach 1 Section
4
Sep 21, 2015 07:59 AM




All times are GMT -5. The time now is 07:09 AM.