rocker arms
01-20-2007, 04:46 PM
I ♥ Acer
Thread Starter
Join Date: May 2006
Location:
Posts: 1,845
rocker arms
what year 302 had the 1.7 ratio rockers that were stud type mount
01-20-2007, 05:57 PM
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
RE: rocker arms
i wasnt aware they ever had 1.7's from the factory
01-20-2007, 06:05 PM
I ♥ Acer
Thread Starter
Join Date: May 2006
Location:
Posts: 1,845
RE: rocker arms
i thought that they did for some of the later models any way what size is the stud on a stock 289 heads
01-20-2007, 06:34 PM
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
RE: rocker arms
studs are 3/8 where they are pressed into the heads (if memory serves) but are for sure 5/16 where the nut threads on
01-21-2007, 02:42 PM
I ♥ Acer
Thread Starter
Join Date: May 2006
Location:
Posts: 1,845
RE: rocker arms
my studs are 3/8 top-bottom
01-21-2007, 02:44 PM
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
RE: rocker arms
umm, i know fords had 5/16 on the top - i cant remember its been while but the earlier ones had 3/8 all the way then? im getting brain bubbles trying to remember
01-21-2007, 03:01 PM
Yukon Cornelius
Join Date: Oct 2005
Location: deep in the heart of dixie GEORGIA
Posts: 11,808
RE: rocker arms
i dont know of any 1.7 factory rockers? i think the 93-95 cobra even uses 1.6 rollers if im correct
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sixer4Life
V6 (1994-2004) Mustangs
5
10-12-2015 04:26 AM
UrS4
S197 Handling Section
10
10-03-2015 06:23 AM
UrS4
S197 Handling Section
1
09-30-2015 10:13 AM
uedlose
Archive - Parts For Sale
1
09-30-2015 08:01 AM
Sixer4Life
New Member Area
4
09-28-2015 07:05 AM