Need a little help.
Thread Starter
Joined: Nov 2006
Posts: 18
Need a little help.
How much vac pressure should I expect from the carb to the vac advance?
I've got 21 ft/lbs at the manifold but nothing at the vac port on the side of the carburetor that feeds the vac advance at the distributor.
This is a new carb. Do I need to take it off a blow out the vac port? Any suggestions as to why I would loose vac pressure at the carb?
I've got 21 ft/lbs at the manifold but nothing at the vac port on the side of the carburetor that feeds the vac advance at the distributor.
This is a new carb. Do I need to take it off a blow out the vac port? Any suggestions as to why I would loose vac pressure at the carb?
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
Suspension
0
Sep 24, 2015 10:12 PM