Ebay find
5th Gear Member
Joined: Jun 2005
Posts: 2,258
From: So. California
RE: Ebay find
Actually all you need is the spindles...thats what allows you to add the granada discs. the granada discs will not bolt to your spindles. buy a set of spindles on ebay the go down to your local parts store and buy the wear products. look at this site
http://www.geocities.com/2bav8/granada.html
[/align]
6th Gear Member
Joined: Oct 2006
Posts: 8,162
From:
RE: Ebay find
the price is too high i can yank the same set up off a junkyard car here but i dont trust used brakes. 67sally check the faq or http://www.mpbrakes.com/
2nd Gear Member
Joined: Sep 2006
Posts: 285
From: Baytown-League City-Houston,Texas
RE: Ebay find
If you dont trust used brakes theres a place here in texas that has the Granada swap all new parts for 550 or somthing like that, Check the FAQ. I know here a while back Soaring got in touch with the guy who runs it, If the deal still goes I believe you have to mention MustangForums and also get a group rate or somthing. That seemed a little steep to me as well since im surrounded by salvage yards.
2nd Gear Member
Joined: Apr 2006
Posts: 432
From: The unemployment epicenter, Detroit, MI
RE: Ebay find
ORIGINAL: MC
If you dont trust used brakes theres a place here in texas that has the Granada swap all new parts for 550 or somthing like that, Check the FAQ. I know here a while back Soaring got in touch with the guy who runs it, If the deal still goes I believe you have to mention MustangForums and also get a group rate or somthing. That seemed a little steep to me as well since im surrounded by salvage yards.
If you dont trust used brakes theres a place here in texas that has the Granada swap all new parts for 550 or somthing like that, Check the FAQ. I know here a while back Soaring got in touch with the guy who runs it, If the deal still goes I believe you have to mention MustangForums and also get a group rate or somthing. That seemed a little steep to me as well since im surrounded by salvage yards.
discbrakeswap.com
I ♥ Acer
Joined: Oct 2004
Posts: 17,565
From:
RE: Ebay find
Dennis wanted 575.00 a month or so ago. Thatwas a cash deal. If you use a credit card add 15 bux or so. Not sure how much shipping would cost though. I guess it would depend on where you live. Get hold of Dennis and ask him.
Foghorn Leghorn
Joined: Dec 2006
Posts: 2,923
From: I reside in a near constant state of amazment.
RE: Ebay find
$600.00? Yikes. That sounds kinda steep. All totaled, my Granada swap cost about 250.00.
I have a set of spindles and backing plates off of a 76 Monarch that Iamgoing to list on Ebay. The guy at the boneyard wanted 200 bucks for the entire setup, but I took off the worn rotors, calipers, and bearings and he only wanted 80.00 for that setup.
I have a set of spindles and backing plates off of a 76 Monarch that Iamgoing to list on Ebay. The guy at the boneyard wanted 200 bucks for the entire setup, but I took off the worn rotors, calipers, and bearings and he only wanted 80.00 for that setup.
Joined: Apr 2007
Posts: 2
RE: Ebay find
I'm a purist. Granada parts belong on a Granada. Mustang on a Mustang, etc.
I'd invest in a conversion kit that uses Boss Mustang spindles and rotors, backing plates, etc. There are a number of vendors that have kits. I'd stay away from the GM
kits. Replacment parts are readily available and cheap, but GM parts on a Mustang? Sacrilegious.
I'd invest in a conversion kit that uses Boss Mustang spindles and rotors, backing plates, etc. There are a number of vendors that have kits. I'd stay away from the GM
kits. Replacment parts are readily available and cheap, but GM parts on a Mustang? Sacrilegious.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
Sep 27, 2015 03:16 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
Sep 25, 2015 06:30 PM