Engine bay blasted and primed

Reply Subscribe

Thread Tools

Search this Thread

May 19, 2007 | 05:06 PM

green_blurr

Thread Starter

3rd Gear Member

Joined: Jul 2006

Posts: 694

From:

Engine bay blasted and primed

Just finished blasting and priming today gonna lay on some paint here soon.

[IMG]local://upfiles/43944/E9A6C7EF8B6D49C18F1899C96A0FA6D8.jpg[/IMG]

[IMG]local://upfiles/43944/EB8307713E994EF2BC447F7FF28D949F.jpg[/IMG]

May 19, 2007 | 05:23 PM

atomsk680

5th Gear Member

Joined: Dec 2005

Posts: 3,806

From: DFW

RE: Engine bay blasted and primed

looks good man! good job

May 19, 2007 | 11:31 PM

restomod67

1st Gear Member

Joined: Nov 2006

Posts: 114

From:

RE: Engine bay blasted and primed

What sandblasting setup do you have ? (Compressor, sandblaster, media..etc)

May 19, 2007 | 11:36 PM

green_blurr

Thread Starter

3rd Gear Member

Joined: Jul 2006

Posts: 694

From:

RE: Engine bay blasted and primed

I am using an 80 pound air compressor that is pressurizing my homemade sandpot that holds about 150 pounds of silica sand.
im using .35 silica sand works great.

May 19, 2007 | 11:39 PM

restomod67

1st Gear Member

Joined: Nov 2006

Posts: 114

From:

RE: Engine bay blasted and primed

Quote:

ORIGINAL: green_blurr

I am using an 80 pound air compressor that is pressurizing my homemade sandpot that holds about 150 pounds of silica sand.
im using .35 silica sand works great.

LOL! I'm tired, it's been a long day. I didn't think to check the poster ID ....I would have realized I HATE YOU becauce you have a 80 gallon compressor!