The drivers side door window rolls up but wont stay up all the way by its self. I pulled out the regulator and saw that one of the rollers is broken. I am having trouble finding this part. It is white and is riveted to the regulator arm. Any ideas on where to find this would be appreciated.
-Kyle-

 

http://www.mustangsplus.com/Merchant...ode=Regulators
i think thats it...

 

Those are the rollers for the 1/4 window. I replaced them already but can not find the door's window rollers

 

you might have to buy all new regulator it should come with new ones on it

 

yes you do have to buy a whole new regulator... the windows are the worst feature on vintage mustangs. They are the 1st thing to fail normally. Depends on what year 'stang u got, or you can get a new regulator here or here ( type in window regulator)

 

? Are you sure it's riveted? I doubt it. I think what you're seeing is the pin that clips in there.

I could be wrong, but I don't think it's riveted. If it is the pin, you should be able to just order the roller and remove the old one, swap em, and you'll be good to go. Do you have any pics?

 

Thanks restomod, thats exactly what i was scared of. It's hard to believe that such a critical part has not been remanufactured yet.