Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Rattle Question

Thread Tools
 
Search this Thread
 
Old Sep 3, 2007 | 10:49 PM
  #1  
MrMischief's Avatar
MrMischief
Thread Starter
 
Joined: Sep 2006
Posts: 30
From:
Default Rattle Question

has anybody ever got their mustang or whatever hot (overheated)? and when you did, did your 289 develop a rattle like mine? i recently got my 289 hot, to the point where it was having a hard time running. it didnt boil over, just really hot. i let it cool down for a day or so and started it up. now it sounds like it has a rattle from the bottom end. its not a knock and i have good oil pressure. does anybody have any guesses what it could be. if i had to guess, i would say oil pump. thanks guys.
Old Sep 3, 2007 | 11:51 PM
  #2  
JMD's Avatar
JMD
6th Gear Member
 
Joined: Jan 2007
Posts: 5,469
From: AR
Default RE: Rattle Question

Honestly I will guess that your rattle might be a broken/cracked piston, or even a bent rod if it got so hot that coolant might have gotten into a cylinder. (hydrolock situation)

New engine noise after an overheat is usually always a serious situation....

Sorry to be the bearer of what I think is probably bad news...
Old Sep 4, 2007 | 06:44 PM
  #3  
MrMischief's Avatar
MrMischief
Thread Starter
 
Joined: Sep 2006
Posts: 30
From:
Default RE: Rattle Question

i thought that as well, but i threw caution to the wind and drove it around the block. normal driving, not careful cautious and nothing happened. i think its really weird.i guess im just goin to have to pull the oil pan to see whats goin on down there.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
3
Oct 2, 2015 08:06 AM
AMAlexLazarus
AmericanMuscle.com
0
Oct 1, 2015 10:29 AM
AMAlexLazarus
AmericanMuscle.com
0
Oct 1, 2015 09:21 AM
UrS4
S197 Handling Section
1
Sep 30, 2015 10:13 AM
treesloth
New Member Area
4
Sep 28, 2015 07:03 AM




All times are GMT -5. The time now is 04:24 AM.