So I have the pass side floor in! It was a major learning curve. my welds are still ugly but i am getting better... On to the drivers side. it feels good to be putting things back in instead of ripping 'em out.....
Here's some photos
http://s198.photobucket.com/albums/a...20Floor%20Pan/

 

good job, it looks like you have made a lot of progress

 

Looks good, keep us updated as you move forward.

 

Thanks! I am about half done with the driver now.

 

Looks great. The mustang I'm getting, 3 of the 4 floors were redone. The passenger rear needs to be done, and I'll be attempting the welds myself.
What's the black stuff you sprayed on the floor when done? Is it just black rustoleum or something special for the floor?

 

It's POR-15. It works great and is really tough. You can spray it but i brushed it on. I accidentally got the glossy black... there is also a flat black. The whole bottom is going to be coated with it as well and it should be so long rust for the floors!

 

Where can I grab this POR-15 stuff? Advance Auto Parts?

 

I don't think so. i went to their web site and then found a dealer in town. i would do a search for dealers in your area.
here is their site
http://www.por15.com/