351 w
Nov 29, 2007 | 08:55 PM
Thread Starter
Joined: Dec 2006
Posts: 93
From:
351 w
if i wanted to change the motor out of a 87 bronco 351w could any 351 fit or maybe 5.0. im lost on it
Nov 29, 2007 | 09:12 PM
Joined: Mar 2006
Posts: 1,261
From: Concord, NC
RE: 351 w
for the most part any 351 or 302/5.0 will fit. the motor mounts are all the same. Most of the changes to these blocks were inside the block.
Nov 29, 2007 | 09:13 PM
Thread Starter
Joined: Dec 2006
Posts: 93
From:
RE: 351 w
that with the tranny too
Nov 29, 2007 | 09:18 PM
Joined: Mar 2006
Posts: 1,261
From: Concord, NC
RE: 351 w
all of the 351W and 302 blocks have the same tranny bolt pattern.
Nov 29, 2007 | 09:22 PM
Thread Starter
Joined: Dec 2006
Posts: 93
From:
RE: 351 w
thanks alot i been surfing all night
Nov 29, 2007 | 09:24 PM
Thread Starter
Joined: Dec 2006
Posts: 93
From:
RE: 351 w
im in roxboro nice to see a fellow carolina neighbor
Nov 29, 2007 | 09:34 PM
Joined: Mar 2006
Posts: 1,261
From: Concord, NC
RE: 351 w
Its alway nice to see people some what close to you if you get in a jam. Their are a few of us Carolina boys here. Like salisbury and asheville
Nov 29, 2007 | 09:35 PM
Thread Starter
Joined: Dec 2006
Posts: 93
From:
RE: 351 w
will do have a good one
Nov 29, 2007 | 10:55 PM
Joined: Apr 2007
Posts: 10,468
From: California
RE: 351 w
The only difference is a few parts, the deck height on a 302 is 8.2" and it's 9.5" on a 351W. So a Windsor is taller and wider than a 302, but not by a whole lot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SSRFUZZY
Members Other Vehicles
6
Jan 6, 2016 08:22 PM
teeeeg67
Classic Mustangs (Tech)
9
Sep 1, 2015 11:53 PM
steelers743
New Member Area
3
Aug 31, 2015 07:16 AM
Mustangs of Illinois
Classic Mustangs (Tech)
4
Aug 22, 2015 10:00 PM
89blueslug
General Tech
1
Aug 10, 2015 07:20 AM
351 w
