I'm wiring a factory 67 tach and was told in a previous thread that its wired from the ignition switch to the tach then to the + side of the coil.

Looking at schematics and from what I was told, I need to wirefrom the red wire from the ignition switch. I have attached a picture of the wires on the back of the ignition switch. There are 4 wires that I see. Thereis a red w/blue stripe, a yellow, a black and a redish pink wire.

My question is, am I wiring the tach from that redish pink wire??

[IMG]local://upfiles/67781/E0F92762B306447FB20B3E05648324F1.jpg[/IMG]

 

Another look at the back of the ignition switch.

[IMG]local://upfiles/67781/6FFD0EF80D204093AF2911A2B9F8E651.jpg[/IMG]

 

This should help, its the page out of the service manual that has the RallyPack hookup info.


[IMG]local://upfiles/40367/B5BE101FF2644854AD73ED77AA2F5D50.jpg[/IMG]