If anyone has soft copy of information for the assembly of the bodyand frame of a 69 Mustang, please contact me.
This may be scans of docs, your own notes from builds, measurements,or what have you.

I have determined that the measurements taken from my car only prove that it was not straight to begin with. I am building the entire car practically from scratch and I need to collect as much data as I can find. What I have determined so far is that there is a half inch difference between the position of my left rear frame rail and the right. This is in a new reproduction trunk pan (one piece) with the new frame rails put into the new trunk. Aligning this to the new tail light panel and measuring the cross distance to the front lower control arms indicates that the distance is out by a half inch.

I need as much infoas I can find to ensure this all goes back together right the first time.

Anything you got is appreciated..

Greg