Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Repair Manual

Thread Tools
 
Search this Thread
 
Old Jun 30, 2008 | 01:44 AM
  #1  
PaladiNSX's Avatar
PaladiNSX
Thread Starter
 
Joined: May 2008
Posts: 10
Default Repair Manual

Hey everyone,

I just picked up a 68 Coupe project thats going to need quite a bit of work. What are everyones recommendations on a good repair manual and source?
Old Jun 30, 2008 | 06:07 AM
  #2  
ThanksDad's Avatar
ThanksDad
3rd Gear Member
 
Joined: Mar 2008
Posts: 585
From: Baltimore MD
Default RE: Repair Manual

Get a paperback shop Manual. They are available at any Mustang Supply place. They offer it in a C/D version also. The paperback is a little more much much more user friendly.
Old Jun 30, 2008 | 08:17 AM
  #3  
mustdoc's Avatar
mustdoc
2nd Gear Member
 
Joined: Jun 2007
Posts: 231
Default RE: Repair Manual

agree - get the factory shop manual - Us older guys tend to prefer the hard copy books but they are also available on CD. A book is easier to reference than a CD in most garages and less likely to malfunction if it gets oil or grease on it!

These are available from most of the large Mustang parts suppliers (e.g. Mustangs Unlimited, etc...).

Would also recommend requesting several different catalogs and "thumbing" through them to get an idea of price variations for similar parts. And when thinking about a purchase, it is not a bad idea to ask the Mustang forum members their experience with certain types of parts and their installation.
Old Jun 30, 2008 | 08:55 AM
  #4  
crunchyskippy's Avatar
crunchyskippy
3rd Gear Member
 
Joined: Jun 2006
Posts: 528
From: Northern Virginia
Default RE: Repair Manual

I also have the Haynes Repair Manual, Chiltons Repair Manual, andMustang Restoration Handbook (by Don Taylor).

Of the three, I probably found the Chiltons to be the single most useful. Haynes is a bit too technical for me as it assumes I know of to perform the individual steps. The Mustang Restoration Handbook is great for starters as it is describes typical pitfalls that you may not know about if just starting out and is fairly verbose.

When I'm performing a task, I generally read all three (and anything else I can find on the net).

I'm embarrased to admit I don'town a shop manual. I could definitely benefit from owning one.
Old Jun 30, 2008 | 10:21 AM
  #5  
ThanksDad's Avatar
ThanksDad
3rd Gear Member
 
Joined: Mar 2008
Posts: 585
From: Baltimore MD
Default RE: Repair Manual

Order a cataloug from CJ's Pony Parts, Virginia Classic Mustang, NPD, California Mustang Parts (I think thats thier name). Do a Google search for 68 Mustang Parts and order a cataloug from everyone that pops up.
Old Jun 30, 2008 | 12:31 PM
  #6  
Starfury's Avatar
Starfury
6th Gear Member
 
Joined: Aug 2007
Posts: 5,896
From: Elk Grove, CA
Default RE: Repair Manual

After buying a shop manual, I chucked my Chilton's. The factory shop manual will tell you how to do nearly everything you might need to do to your car, and it will actually have accurate photos and diagrams, unlike Chilton's/Hayne's books.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
b8checker
Classic Mustangs (Tech)
8
Oct 8, 2015 12:55 PM
BeatnikFink
New Member Area
6
Oct 1, 2015 08:00 PM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
Sep 30, 2015 05:54 PM
b8checker
New Member Area
3
Sep 30, 2015 07:11 AM
Mustangmalo
General Tech
2
Sep 6, 2015 05:22 PM




All times are GMT -5. The time now is 04:33 PM.