1966 horn problem
02-17-2009, 12:34 PM
Thread Starter
Join Date: Feb 2009
Location: va
Posts: 3
1966 horn problem
I've replaced harness and horns on my 66 convertable and they don't work correctly. Each horn hooked up separately sound fine but when both are hooked up they don't sound correct. Help!
02-17-2009, 12:42 PM
Join Date: Feb 2009
Location: California
Posts: 12
lol, every car ive ever owned horn has only lasted a year or so, just rev your motor when you wanna pass, lol
02-17-2009, 01:47 PM
2nd Gear Member
Join Date: Feb 2009
Location: South Jersey
Posts: 278
Try posting in the Classic Mustangs Section. You will get more responses.
Welcome to the forums!
02-17-2009, 02:34 PM
2nd Gear Member
Join Date: Jan 2009
Location: Alberta,Canada
Posts: 232
There should be an adjustment screw on them.
Sounds like (pardon the pun) that they are corroded.
02-17-2009, 03:01 PM
4th Gear Member
Join Date: May 2008
Location: Houston, Texas
Posts: 1,019
How is the turn signal switch / horn button in your steering column?
Old, new, etc???
02-17-2009, 03:11 PM
2nd Gear Member
Join Date: Nov 2006
Posts: 348
I would try the adjustment screws on the horns. It made a huge difference in my orginal horns and saved me a lot of money..
02-18-2009, 08:51 AM
Thread Starter
Join Date: Feb 2009
Location: va
Posts: 3
Thanks for the suggestions
I'll give the horn adjustment screw a try and see what happens. Thanks for the replies.
02-18-2009, 11:28 AM
Thread Starter
Join Date: Feb 2009
Location: va
Posts: 3
Thanks again
Yahoo, I was just out at the pony and tweeked her horn adjustments and now I have 2 working horns. Thanks again!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GPR
Classic Mustangs (Tech)
12
12-16-2015 12:21 PM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 07:59 AM
Sminemann
Classic Mustangs (Tech)
7
09-17-2015 09:24 AM
Pyrate Dave
5.0L (1979-1995) Mustang
8
09-10-2015 07:30 PM