When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
well do you think if i go get some anti-seize the thing will start threading because i tried and i tried and couldn't get it to thread by hand or with the tool
never ever try to get a thread started with a tool when it doesn't get started with hands.
if you crossthread this one you can just as well throw away your heads
Well i meant i just had the spark plug in the bit and tried turning it in my hands with no luck. The autolite 104 threads perfect everytime though.....
did you hold the 25 across to the 104 so that one thread is locked in the other to see if it's the same thread. measured thread size
just to make sure they actually are the same thread
take a flashlight and look down the threads. is there about 3/8" of unthreaded bore before you get to the threads? if so, you have e6 heads. the e7s don't have any unthreaded bore.
is there anything like a 104 but in the 5 heat range?
