Here's a puzzling hazard light problem
#1
Here's a puzzling hazard light problem
I have power to the flasher and in turn the safety flasher switch, but when I flip the switch they lights don't work. Only when I use the turn signal switch left or right will both work. They are sequential LED taillights and they both work.
Even before installing them about a month and half ago, the hazard lights wouldn't work. I didn't try the turn signal switch in tandem back them. I just assumed that it was a bad switch at the time.
Any idea's? I have the schematic and I see that three of the wires from the switch head over to the steering column and the turn signal switch. Hmmmmmm.
Has me puzzled.
Even before installing them about a month and half ago, the hazard lights wouldn't work. I didn't try the turn signal switch in tandem back them. I just assumed that it was a bad switch at the time.
Any idea's? I have the schematic and I see that three of the wires from the switch head over to the steering column and the turn signal switch. Hmmmmmm.
Has me puzzled.
Thread
Thread Starter
Forum
Replies
Last Post
Faolan65
New Member Area
2
08-27-2015 06:40 AM
Faolan65
Arizona Regional Chapter
0
08-25-2015 09:24 AM