Alignment on a 70
Thread Starter
1st Gear Member
Joined: Jan 2007
Posts: 109
From:
Alignment on a 70
Does anyone have the specs for an alignment,the garages today dont have info for their computers going that far back.I just change the spindles from drum to disc and now Im at 1 inch toe out.
1st Gear Member
Joined: Dec 2010
Posts: 136
From: az
these r the specs i got from daze cars
Please align to these specs “1967-1970 Mustang, Falcon & Cougar Performance Alignment with or without the Shelby dropâ€.
These specifications are in order of importance.
1. NO more than .25 degrees difference between driver’s side and passenger’s side.
2. +2.0 to +3.5 degrees caster.
3. -.5 to 0 degrees camber. No positive camber, please. There is no problem having a slight variation from driver’s side to passenger’s side to account for the crown in the road.
4. 1/16" to 1/8†toe in
These specifications are in order of importance.
1. NO more than .25 degrees difference between driver’s side and passenger’s side.
2. +2.0 to +3.5 degrees caster.
3. -.5 to 0 degrees camber. No positive camber, please. There is no problem having a slight variation from driver’s side to passenger’s side to account for the crown in the road.
4. 1/16" to 1/8†toe in
Thread
Thread Starter
Forum
Replies
Last Post
