Convertible Tech This section is only for questions or information relating to a convertible. Questions about drivetrain modifications should still be posted in the engine specific sections.

Top won't move at all.

Thread Tools
 
Search this Thread
 
Old Aug 5, 2008 | 09:27 PM
  #1  
pbMaxLax44's Avatar
pbMaxLax44
Thread Starter
1st Gear Member
 
Joined: Jan 2008
Posts: 79
From: Indiana
Default Top won't move at all.

All of the sudden my top won't work on my 2000(earlier edition) 3.8. It's not the convertible top fuse under the dash, it's perfectly fine. When I push the button I can hear a faint click towards the back of the car but nothing happens. Yes I am doing it properly, I have been for 4 months. What could be wrong?
Old Aug 6, 2008 | 11:57 PM
  #2  
drew50's Avatar
drew50
1st Gear Member
 
Joined: May 2007
Posts: 73
From:
Default RE: Top won't move at all.

Have you checked all the electrical connections? Maybe its something like that. Hope you figure it out.
Old Aug 7, 2008 | 01:08 PM
  #3  
pbMaxLax44's Avatar
pbMaxLax44
Thread Starter
1st Gear Member
 
Joined: Jan 2008
Posts: 79
From: Indiana
Default RE: Top won't move at all.

Not yet, today I'm about to take it all part and just follow the button all the way back.
Old Aug 11, 2008 | 01:48 PM
  #4  
chicobob's Avatar
chicobob
 
Joined: May 2006
Posts: 2
Default RE: Top won't move at all.

I have a 2006 convertible and had the same symptoms about 3 months into owning it. Not sure if the process is the same on your model but I was able to find a hydraulic pump in the trunk pan and see that it was blowing fluid all over the place. Turns the whole thing needed to be replaced. Might be something to look for...
Old Aug 17, 2008 | 08:43 AM
  #5  
remlle's Avatar
remlle
 
Joined: Aug 2008
Posts: 5
Default

If you hear a click Im betting you hearing the relays clicking in. I have an 89 GT Vert and it did the same thing. I could hear the relays click in but no motor. the motor brushes were shot and caused the motor to stop turining. I took the motor out of the houseing and could see it was bad. smelled burnt and all. I went to a classic mustang place and got a new pump and it worked. fixed my issue. it was close to 300 bucks. but I know on ebay there are a ton of used ones. might be worth checking into.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2007StangV6
2005-2014 Mustangs
30
Jan 28, 2016 06:09 PM
Meystang
5.0L (1979-1995) Mustang
5
Sep 25, 2015 04:05 PM
uedlose
Archive - Parts For Sale
0
Sep 10, 2015 03:30 PM




All times are GMT -5. The time now is 02:42 PM.