General Tech Ask model specific questions in the appropriate category below. All other general questions within.

HELP

Old May 9, 2006 | 09:55 PM
  #1  
302pony's Avatar
302pony
Thread Starter
1st Gear Member
 
Joined: Nov 2005
Posts: 77
From:
Default HELP

hi, i have a 331 with a vic jr, 700 cfm carb. i was woundering if that does not pass emissions, can i lean out the air/fuel ratio and make it pass? its going in an 86 mustang.
any help would be very good.
Old May 9, 2006 | 10:26 PM
  #2  
anthonydalrymple's Avatar
anthonydalrymple
3rd Gear Member
 
Joined: Apr 2006
Posts: 506
Default RE: HELP

It would help if you listed the state in which you are trying to pass emissions in.....
Old May 10, 2006 | 02:11 AM
  #3  
myshifter's Avatar
myshifter
I ♥ Acer
 
Joined: May 2006
Posts: 1,364
From:
Default RE: HELP

Ya we would lean out big blocks, almost glowing they were so hot then fatten em up right after testing. In illinois we play the games as long as possible with state. We usually end up with some type of waiver.
Old May 10, 2006 | 08:13 AM
  #4  
302pony's Avatar
302pony
Thread Starter
1st Gear Member
 
Joined: Nov 2005
Posts: 77
From:
Default RE: HELP

mass


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:19 PM.