General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Anyone know how to fix windshield Squirters ?

Thread Tools
 
Search this Thread
 
Old May 22, 2006 | 02:43 AM
  #1  
chrisr291's Avatar
chrisr291
Thread Starter
 
Joined: Dec 2004
Posts: 42
Default Anyone know how to fix windshield Squirters ?

Only the drivers side shoots out now and just barely. Anyone have a diagram or have the time to give me decent instructions on what I should look for and how to fix it? I have a 2000 Mustang, thanks!
Old May 22, 2006 | 03:48 AM
  #2  
alexr's Avatar
alexr
★★★★★
 
Joined: May 2005
Posts: 10,200
From: Banned Camp (Counselor)
Default RE: Anyone know how to fix windshield Squirters ?

stick a sewing needle in the nozzle, there's probably something clogging the nozzle.
Old May 22, 2006 | 08:18 AM
  #3  
PRO50SC's Avatar
PRO50SC
The Rogue Mod
 
Joined: Feb 2006
Posts: 21,918
From: Maryland Sucka's!!
Default RE: Anyone know how to fix windshield Squirters ?

Take some compressed air and blow it back through the nozzles.
Old May 23, 2006 | 02:05 AM
  #4  
chrisr291's Avatar
chrisr291
Thread Starter
 
Joined: Dec 2004
Posts: 42
Default RE: Anyone know how to fix windshield Squirters ?


ORIGINAL: ARdoller

stick a sewing needle in the nozzle, there's probably something clogging the nozzle.

You know, thank you so much! I stuck one in there this afternoon and now the water shoots out so far that it hits my trunk!

The Windshield squarter hasn't been working for a few weeks and my windshield was so dirty one time that I almost had to stick my head out of the window to see. The only option I had that day was to haul *** (what a bright idea right?) and shoot the water at the same time so that the wind would carry the water to the rest of my windshield.

AGAIN! THANKS!
Old May 23, 2006 | 03:01 AM
  #5  
rmodel65's Avatar
rmodel65
Yukon Cornelius
 
Joined: Oct 2005
Posts: 11,812
From: deep in the heart of dixie GEORGIA
Default RE: Anyone know how to fix windshield Squirters ?


ORIGINAL: chrisr291


ORIGINAL: ARdoller

stick a sewing needle in the nozzle, there's probably something clogging the nozzle.

You know, thank you so much! I stuck one in there this afternoon and now the water shoots out so far that it hits my trunk!

The Windshield squarter hasn't been working for a few weeks and my windshield was so dirty one time that I almost had to stick my head out of the window to see. The only option I had that day was to haul *** (what a bright idea right?) and shoot the water at the same time so that the wind would carry the water to the rest of my windshield.

AGAIN! THANKS!
what? lol thats what the little windsheild scrubber is for at the gas station is for!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
4cylinderplus2
V6 (1994-2004) Mustangs
10
Oct 9, 2020 07:45 PM
mrtrodonet
V6 (1994-2004) Mustangs
3
Sep 19, 2020 03:12 PM
bradleyb
Classic Mustangs (Tech)
3
Nov 27, 2015 07:50 PM
jerrytubes
2005-2014 Mustangs
2
Oct 23, 2015 12:11 PM
bradleyb
California Regional Chapter
0
Oct 1, 2015 01:02 AM




All times are GMT -5. The time now is 07:59 AM.