Topless1995GT

I have a 1995 F-250 with the stock 351, the motor is in excellent condition. I plan on using this motor on a fox (make and model to be determined).

I would like to know if there is anyone that can give me the current specs on a bone stock 1995 model 351w?

What original parts off of this motor can be carried over during the rebuild (intake, cam, heads, and exhaust manifolds will be swapped durring rebuild).

What is the stock horse power and what can I expect out of a "good" top end kit (will not specify a kit as of yet so base horse power off of the kit of your preference.)

Can the stock computer out of either the truck, or the fox be used?

I am working on a tight budget, but once again, the budget will be determined with each of your personnal opinions, and knowledgable facts.

This is a serious post, most of my uneducated decisions will be based off of the professional/knowledgable advice given in this post, so please try to be specific and realistic.

FYI, there will be no blower nor NOS in this cars future.

Thanks to you all in advance.

Topless1995GT

Well if theres no 351 gurus here, can I at least ask someone to enlighten me as to how to find out the information I will need to surf the web and investigate for my self, where to get the model number etc. or any helpful information as to what type of block I have and what ill be getting myself into in the long run...

Any information would be extremely helpful at this point.

w8less

try the 351 section of this site there is people with 351swaps into there vehicles