General Tech Ask model specific questions in the appropriate category below. All other general questions within.

need an estimate

Thread Tools
 
Search this Thread
 
Old May 6, 2004 | 12:11 AM
  #1  
fast86gt's Avatar
fast86gt
Thread Starter
 
Joined: May 2004
Posts: 19
Default need an estimate

i have long tube headers, o/r x, pypes cat back, intake, underdrive pullies, and a pro 5.0 shifter..... now my probelm is i dont have a drag track anywhere near where is live..... what do you think i could do the 1/4 in with those mods?
Old May 6, 2004 | 02:10 AM
  #2  
nhdungeonracer's Avatar
nhdungeonracer
3rd Gear Member
 
Joined: Mar 2004
Posts: 607
From:
Default RE: need an estimate

I've run 14.7 with mine being mostly stock. All I have is a K+N filter in the fender with a Moroso elbow to the MAF, a Steeda shifter and 3:55 gears. If you managed to get traction off the line, I would guess you'd be in the mid to low 14's, maybe high 13's.
Old May 6, 2004 | 01:45 PM
  #3  
roundman's Avatar
roundman
5th Gear Member
 
Joined: Mar 2004
Posts: 4,813
From:
Default RE: need an estimate

86's don't have the best heads out there, so I would say with the few mods you have you might get into the mid to high 14's, but don't think it would be any better than that unless you have taking a lot of weight out of the car.
Old May 7, 2004 | 02:26 AM
  #4  
VertStangGT86's Avatar
VertStangGT86
4th Gear Member
 
Joined: Feb 2004
Posts: 1,494
From:
Default RE: need an estimate

Yea, remember you don't have the light LX notch that nhdungeon has. He also runs good times for what he has, if you got traction I'd go with 14's.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aggiebq86
Classic Mustangs (Tech)
4
Sep 4, 2015 12:20 PM
kdryan
The Racers Bench
3
Aug 22, 2015 02:14 PM
svtrosey
SVT Forums
4
Aug 15, 2015 09:09 PM
James Watson
General Tech
1
Aug 6, 2015 06:42 AM




All times are GMT -5. The time now is 07:43 PM.