General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Should I Mach 1 it?

Thread Tools
 
Search this Thread
 
Old Jul 7, 2006 | 01:34 PM
  #1  
Stang562's Avatar
Stang562
Thread Starter
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default Should I Mach 1 it?

Hey my engine is starting to get you know.. weak and old... and I was wondering how much would it cost me to drop a Mach 1 engine into it. its my first car and I don't want to sell it, and I already have about 2k saved up. Is it worth it? and how much more do I need?
Old Jul 7, 2006 | 01:44 PM
  #2  
disgustipated's Avatar
disgustipated
2nd Gear Member
 
Joined: May 2006
Posts: 204
From:
Default RE: Should I Mach 1 it?

Well the engine by itself is almost $7,000 straight from Ford. Plus installation, etc. So...a lot more than $2,000

http://www.fordracingparts.com/crate...dularcobra.asp
Old Jul 7, 2006 | 02:04 PM
  #3  
Stang562's Avatar
Stang562
Thread Starter
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default RE: Should I Mach 1 it?

so Im better of getting like a low mileage 98 cobra engine or a 99+ gt?
Old Jul 7, 2006 | 02:16 PM
  #4  
disgustipated's Avatar
disgustipated
2nd Gear Member
 
Joined: May 2006
Posts: 204
From:
Default RE: Should I Mach 1 it?

I'd check eBay or try to find wrecked Mach1's/Cobra's that have a good engine for less money. You don't necessarily need a BRAND NEW engine, do you? As long as it has low miles you should be okay.
Old Jul 7, 2006 | 05:17 PM
  #5  
StickShifty's Avatar
StickShifty
5th Gear Member
 
Joined: May 2005
Posts: 4,536
From: New Jersey
Default RE: Should I Mach 1 it?

7000 that is such a rip
Old Jul 7, 2006 | 06:32 PM
  #6  
krashyman's Avatar
krashyman
 
Joined: Jul 2006
Posts: 10
From:
Default RE: Should I Mach 1 it?

My shop ordered a new Mach 1 engine for my 65 Comet thru a dealer for $5,700 -- still not as cheap as buying a used (and maybe still a ripoff), but we're going new on everything.
Old Jul 7, 2006 | 10:27 PM
  #7  
alexr's Avatar
alexr
★★★★★
 
Joined: May 2005
Posts: 10,200
From: Banned Camp (Counselor)
Default RE: Should I Mach 1 it?

you'd also have to custom cut out a hole in the hood for the shaker scoop. i dont think you can buy a shaker hood for the sn95
Old Jul 7, 2006 | 10:38 PM
  #8  
sandcracker21's Avatar
sandcracker21
4th Gear Member
 
Joined: Mar 2005
Posts: 1,957
From:
Default RE: Should I Mach 1 it?

an sn95 with a mach 1 engine......

very unique
Old Jul 8, 2006 | 02:37 AM
  #9  
Stang562's Avatar
Stang562
Thread Starter
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default RE: Should I Mach 1 it?


ORIGINAL: ARdoller

you'd also have to custom cut out a hole in the hood for the shaker scoop. i dont think you can buy a shaker hood for the sn95
DAMN so I'd have to get rid of my new Cobra R hood?
Old Jul 8, 2006 | 07:11 AM
  #10  
Colorado_Mustang's Avatar
Colorado_Mustang
5th Gear Member
 
Joined: Jun 2006
Posts: 4,089
From:
Default RE: Should I Mach 1 it?


ORIGINAL: Stang562


ORIGINAL: ARdoller

you'd also have to custom cut out a hole in the hood for the shaker scoop. i dont think you can buy a shaker hood for the sn95
DAMN so I'd have to get rid of my new Cobra R hood?
You don't have to run the shaker scoop on a Mach I engine....[sm=bangbang.gif]



All times are GMT -5. The time now is 11:35 AM.