Traction control switch problems
#1
Traction control switch problems
So I have a 2000 GT 5 spd
Problem is turn the key to "ON" and the traction control switch does NOT light up
Now The switch is new, and fine. There is 5 wires to the harness, power, ground and three others. There is 12v at power and should be .04v at two other wires. I have tested it and there is NOT .04v at the other two wires ? ?
so any techs here, gimme a hand in finding the problem.
Thanks
Problem is turn the key to "ON" and the traction control switch does NOT light up
Now The switch is new, and fine. There is 5 wires to the harness, power, ground and three others. There is 12v at power and should be .04v at two other wires. I have tested it and there is NOT .04v at the other two wires ? ?
so any techs here, gimme a hand in finding the problem.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post