i have a '01 mustang gt. it has some mods but i will be adding nitrous and a s/c soon. what would be the best springs to put on the car if i mainly plan on drag racing it? i bought some cheap dropzone one's from ebay and they suck and did nothing.......

 

STEEDA DRAG SPRINGS!!!!

 

i think MD is runnig fox springs in the front and stock in the back with one coil removed and upper and lower control arms and is pulling 1.7 60ft times with 245/45/17 dr's

 

yea [8D], rides like stock too

 

where did you get your fox springs from?

 

probaly off of a fox body mustang

 

hahaha... sorry dude had a point

I pulled em off a junkyard 4cyl car for the front, for the rear you can cut your stock springs or get a junkyard v8 set and cut them

 

yea he does.....
so did the fox body springs make the front of your car look just like your pic shows?
thanks for the help.....

 

yepper thats from stock 4cyl fox springs

 

thats prob what im going to do then, it looks lowered. did you happen to measure the car height before and after?