8.8 Rear End ,RX7 Member Needs Help
#1
8.8 Rear End ,RX7 Member Needs Help
So, i'm pretty new to the forum and the reason being I blew my dads motor and my friend blew my rear end. ON the same day might I add. So I got the motor fixed no thanks to might efforts of selling my audio system but i do turbo rebuilding so thats what i needed to replace and my homie had a turbo eclipse block in his garage so that was taken care of.
But my Turbo II First generation RX7 is still down. He was busting some "nuts and figure 8 when my rt 615's got worm and just stuck to the ground not even letting him do a quarter of a nut.
LONG STORY SHORT. WOOO woo wOO.
I bought a 96 rear end and i need to know where to get performance parts, Brakes ,Gears,SBraided lines,D&Slotted Rotors
bearings , any catalogs or websites would be helpful i believe. Thanks
But my Turbo II First generation RX7 is still down. He was busting some "nuts and figure 8 when my rt 615's got worm and just stuck to the ground not even letting him do a quarter of a nut.
LONG STORY SHORT. WOOO woo wOO.
I bought a 96 rear end and i need to know where to get performance parts, Brakes ,Gears,SBraided lines,D&Slotted Rotors
bearings , any catalogs or websites would be helpful i believe. Thanks
#2
RE: 8.8 Rear End ,RX7 Member Needs Help
ORIGINAL: BOOBYBOOBY1
So, i'm pretty new to the forum and the reason being I blew my dads motor and my friend blew my rear end. ON the same day might I add. So I got the motor fixed no thanks to might efforts of selling my audio system but i do turbo rebuilding so thats what i needed to replace and my homie had a turbo eclipse block in his garage so that was taken care of.
But my Turbo II First generation RX7 is still down. He was busting some "nuts and figure 8 when my rt 615's got worm and just stuck to the ground not even letting him do a quarter of a nut.
LONG STORY SHORT. WOOO woo wOO.
I bought a 96 rear end and i need to know where to get performance parts, Brakes ,Gears,SBraided lines,D&Slotted Rotors
bearings , any catalogs or websites would be helpful i believe. Thanks
So, i'm pretty new to the forum and the reason being I blew my dads motor and my friend blew my rear end. ON the same day might I add. So I got the motor fixed no thanks to might efforts of selling my audio system but i do turbo rebuilding so thats what i needed to replace and my homie had a turbo eclipse block in his garage so that was taken care of.
But my Turbo II First generation RX7 is still down. He was busting some "nuts and figure 8 when my rt 615's got worm and just stuck to the ground not even letting him do a quarter of a nut.
LONG STORY SHORT. WOOO woo wOO.
I bought a 96 rear end and i need to know where to get performance parts, Brakes ,Gears,SBraided lines,D&Slotted Rotors
bearings , any catalogs or websites would be helpful i believe. Thanks
#4
RE: 8.8 Rear End ,RX7 Member Needs Help
First get a flux capacitor and a discombobulator. Then Translate your first post to english. And then do us all a favor
and not bust a nut or eight nuts in any figure eights. Wait was he trying to crack open a wallnut with rt 615's on your RX7.
I'm lost
and not bust a nut or eight nuts in any figure eights. Wait was he trying to crack open a wallnut with rt 615's on your RX7.
I'm lost
#6
RE: 8.8 Rear End ,RX7 Member Needs Help
it's simple, f all the rest * that was backround gibberish*
my question is
Where Do I Get Performance Parts For An 8.8 96 GT?
i.e, drilled and slotted rotors, performance breaks,steel braided lines,gears,bearings, 31 spline option, anything you know???
any help ......
my question is
Where Do I Get Performance Parts For An 8.8 96 GT?
i.e, drilled and slotted rotors, performance breaks,steel braided lines,gears,bearings, 31 spline option, anything you know???
any help ......
#9
#10
Thread
Thread Starter
Forum
Replies
Last Post
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM
M3hunter
S197 Handling Section
0
09-05-2015 03:42 PM
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM