need help with 87 5.0
#1
need help with 87 5.0
hi,
i recently purchased a 87 5.0 i was hoping that some one could help me out i am looking to do some engine work i was hoping some one new of the cheapest way to get more horse power and torque with out doing major engine work i am also looking for a five speed trans any help is appreciated
i recently purchased a 87 5.0 i was hoping that some one could help me out i am looking to do some engine work i was hoping some one new of the cheapest way to get more horse power and torque with out doing major engine work i am also looking for a five speed trans any help is appreciated
#2
RE: need help with 87 5.0
If its still got the stock exhaust ditch it. You want a full 2 1/2" exhaust from the headers back, stock is only 2 1/4". This includes the H-pipe, get a hi-flo piece or an off-road, check your emissions requirements first.Dont forget aftermarket mufflers and headers. All thatadds 'some' hp and tq plus it soundsmeaner as well.Its not a lot but its a start.
Get a complete tuneup and a KnN (i went back to stock and dont notice a diff.). Bump the timing a bit...if it starts to ping back off till it stops. Mine is set around 12-13 and runs on nothing but 92-93. Itll ping on 87.
As for engine mods ill leave that to the those thatve done it.
Get a complete tuneup and a KnN (i went back to stock and dont notice a diff.). Bump the timing a bit...if it starts to ping back off till it stops. Mine is set around 12-13 and runs on nothing but 92-93. Itll ping on 87.
As for engine mods ill leave that to the those thatve done it.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
treesloth
New Member Area
4
09-28-2015 07:03 AM