General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Guage Install, HELP

Old May 16, 2007 | 11:22 PM
  #1  
mikey29464's Avatar
mikey29464
Thread Starter
 
Joined: Feb 2007
Posts: 25
Default Guage Install, HELP

Looking for a good place to tap into the dash lights ,so that the guage lights will dim like the dash lights. I also need to tap into the ignition switch for the elect. fuel pressure guage.I appreciate any suggestions/ help
Old May 17, 2007 | 01:12 AM
  #2  
Tac2cul's Avatar
Tac2cul
3rd Gear Member
 
Joined: Nov 2005
Posts: 784
From: Arizona
Default RE: Guage Install, HELP

yr of your stang?

if 99+ use the blue/white wire from headlight switch


Also get a test light and figurethe rest out dats what i did...believe me it works wonders
Old May 17, 2007 | 09:46 AM
  #3  
mikey29464's Avatar
mikey29464
Thread Starter
 
Joined: Feb 2007
Posts: 25
Default RE: Guage Install, HELP

Thanks,I appreciate the tip.I've swapped out the rearend , installed the procharger. I'm sure I'll figure it out
Old May 17, 2007 | 03:52 PM
  #4  
01Steed's Avatar
01Steed
I ♥ Acer
 
Joined: May 2007
Posts: 151
From:
Default RE: Guage Install, HELP

ORIGINAL: Tac2cul

yr of your stang?

if 99+ use the blue/white wire from headlight switch


Also get a test light and figurethe rest out dats what i did...believe me it works wonders
+1. You'll love the ability to dim them with therest of your i/p lights.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mtgldr
S197 Handling Section
5
Feb 3, 2024 09:00 PM
BOBCATJACK
New Member Area
3
Sep 14, 2015 02:18 AM
tj@steeda
Steeda Autosports
0
Sep 10, 2015 08:39 PM
96stang3.8
V6 (1994-2004) Mustangs
1
Sep 10, 2015 06:42 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:34 AM.