General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by:
Sponsored by: DashLynx

What year is my engine?

Thread Tools
 
Search this Thread
 
Old 08-15-2007, 03:11 PM
  #1  
JPaikos
1st Gear Member
Thread Starter
 
JPaikos's Avatar
 
Join Date: Oct 2003
Location: Northridge, CA
Posts: 145
Default What year is my engine?

The only numbers I could find were "9E22" or "9F22" cant tell for sure if
its an E or F and "05" but not together.
JPaikos is offline  
Old 08-15-2007, 07:49 PM
  #2  
LiLJimmyNorton
 
LiLJimmyNorton's Avatar
 
Join Date: Aug 2007
Location:
Posts: 32
Default RE: What year is my engine?

ORIGINAL: JPaikos

The only numbers I could find were "9E22" or "9F22" cant tell for sure if
its an E or F and "05" but not together.

Small block Fords have a four digit code followed by the base number for the system cast in where the starter motor bolts to the Bell housing, The fist letter gives the decade the following number gives the year of the decade the next letter gives the carline and the last letter the engineering department number which would normally be Engine engineering.
So for example a number such as C5ZE- 6015 would be broken down like this.
C= Decade of 1960, 5= year of decade i.e.1965,, Z = Mustang car line E = Engine engineering this is followed by the base number for the system 6015 for base engine this is followed by a suffix which gives further information if the part has been changed..
Decade of Manufacture
A=1940
B=1950
C=1960
D=1970
E=1980
F=1990
The year of decade is simple the number represents the year so D9 =1979

Casting can also have a number that breaks down to actual casting date e.g. 6c06 would break down to 6 the year of the decade 6 for the sixth year C for the letter of the month and 06 would be the day of the month.

A = Jan.
B = Feb.
C = March
D = April
E = May
F = June
G = July
H = August
J = Sept.
K = Oct.
L = Nov.
M = Dec.

9E22 could be May 22nd and a year ending with 9 could be 69,79 and so on .... Sorry if that wasnt too much help





.
LiLJimmyNorton is offline  
Old 08-15-2007, 08:09 PM
  #3  
samseed101
6th Gear Member
 
samseed101's Avatar
 
Join Date: Jun 2006
Location: Maine
Posts: 5,693
Default RE: What year is my engine?

There's a mecanic in your area that should know about it. Look for Steve from yellowstone. He works with a guy names Frunkis.
samseed101 is offline  
Old 08-15-2007, 08:11 PM
  #4  
LiLJimmyNorton
 
LiLJimmyNorton's Avatar
 
Join Date: Aug 2007
Location:
Posts: 32
Default RE: What year is my engine?

ORIGINAL: samseed101

There's a mecanic in your area that should know about it. Look for Steve from yellowstone. He works with a guy names Frunkis.
AH Yes Steve from Yellowstone very good machanic .... Drinks alot of broth lately though ...
LiLJimmyNorton is offline  
Old 08-15-2007, 08:20 PM
  #5  
samseed101
6th Gear Member
 
samseed101's Avatar
 
Join Date: Jun 2006
Location: Maine
Posts: 5,693
Default RE: What year is my engine?

That's cause he started to hang out with Ramone again.
samseed101 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drfister
2005-2014 Mustangs
11
05-03-2018 10:38 PM
movielover40
New Member Area
5
08-27-2015 10:13 PM
Tyoung68
New Member Area
7
08-25-2015 04:31 AM
KEM Motorworks
5.0L (1979-1995) Mustang
20
08-14-2015 10:13 PM



Quick Reply: What year is my engine?



All times are GMT -5. The time now is 03:37 AM.