View Poll Results: A poll
Voters: 85. You may not vote on this poll
Predict RWHP for my project for fun
Thread Starter
4th Gear Member
Joined: Nov 2004
Posts: 1,724
From:
RE: Predict RWHP for my project for fun
May have to but I am going to try the normal belt route first. The paxton kit gives a good wrap around the SC and has a manual tensioner. I am going to move the PS pump up to where the AC was, the kit for that should be in today.
ORIGINAL: mustang30240
should throw a cog pulley setup on it
should throw a cog pulley setup on it
Thread Starter
4th Gear Member
Joined: Nov 2004
Posts: 1,724
From:
RE: Predict RWHP for my project for fun
Still waiting for that PRO-M 80 MM MAF meter calibrated for 42# injectors. While I wait I replumbed from the SC to the TB with larger pipe.
[IMG]local://upfiles/10436/B024F463A78B4FCB935D76E339894DC1.jpg[/IMG]
[IMG]local://upfiles/10436/B024F463A78B4FCB935D76E339894DC1.jpg[/IMG]
Thread Starter
4th Gear Member
Joined: Nov 2004
Posts: 1,724
From:
RE: Predict RWHP for my project for fun
Removed it, threw it in the trash. Plugged the port in the block, used a solid gasket on the egr spacer, put a plate where the valve use to be, removed the control valve from the fender well.
ORIGINAL: 87mustang347
progress is commin along very nicely. what did u do with your egr?
progress is commin along very nicely. what did u do with your egr?