REAR LOWER CONTROL ARMS
#1
REAR LOWER CONTROL ARMS
Major problem! I have a '95 GT suspension/floorpan under a 1968 body. The GT suspension was lengthened by 6 3/4" in the front, the problem is in the rear. I bought "Roush" rear lower control arms very cheap from eBay. The problem is they seem to be 3/4" to 7/8" shorter than stock ones. The reason I don't know the exact dimension is that we are measuring the installed ones on my car, compared to the ones installed on my buddy's 95. Anybody got any stock lower rears that you could measure center to center on the bushings?
Any help would be greatly appreciated, we are stuck till we decide what to do.
Oh, and if anyone wants to trade, I'll take $75 and your stock lowers.
Kev
(signature to come)
Any help would be greatly appreciated, we are stuck till we decide what to do.
Oh, and if anyone wants to trade, I'll take $75 and your stock lowers.
Kev
(signature to come)
Thread
Thread Starter
Forum
Replies
Last Post
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM
M3hunter
S197 Handling Section
0
09-05-2015 03:42 PM