General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Driver's window seal

Thread Tools
 
Search this Thread
 
Old Feb 23, 2008 | 08:59 AM
  #1  
mcfarway's Avatar
mcfarway
Thread Starter
2nd Gear Member
 
Joined: Feb 2007
Posts: 169
From:
Default Driver's window seal

Latelymy driver's side window doesn't seal in the upper-rear corner when I shut the door. If I'm shutting it from the outside, I can close the door by pressing on the upper-rear corner & it seals fine. If I'm inside the car, after closing the door I have to roll the window down, then back up to get it to seal. I haven't done anything to my car/door ... maybe somebody messed with it (trying to break in)? If anyone can help me figure out how to get the windowrealignedI'd appreciate any/all advice.
Old Feb 23, 2008 | 09:32 AM
  #2  
BLK89GT's Avatar
BLK89GT
1st Gear Member
 
Joined: Jan 2008
Posts: 145
From: New Jersey
Default RE: Driver's window seal

im not sure if your door pin bushings are like the fox body but on the door hinge if the bushings that hold the pins in place are bad thats probably ur problem. thats somthing you can look into. or it might be somthing as simple as your window being off track or somthing is loose. i would start there. hope that helps some
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cr620
V6 (1994-2004) Mustangs
2
Oct 3, 2022 10:18 PM
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
baddog671
Archive - Parts For Sale
20
Jul 26, 2016 01:20 PM
bradleyb
Classic Mustangs (Tech)
3
Nov 27, 2015 07:50 PM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
Sep 30, 2015 05:54 PM




All times are GMT -5. The time now is 05:57 AM.