Help-I put my 4bbl float bowls in carb cleaner and the PLASTIC plugs in the sides by the fuel transfer tube have turned to mush. Are these replaceable? I wonder if"gasahol" will do the same damage.

 

yes isn't one in the carb kit?...I would use gasahol..I thought they quit maiking it if you must use it maybe 1/2 -1/2 with gas

 

vfast-My kit did not come with any plugs like that. The plug is usually metal and pressed in like a freeze plug. With all this BS I am going through, I will probably be better off dumping the motorcraft/holley and getting an aftermarket holley. Holley rebuild kits are everywhere, and kits for the stock carb are special order-and double the price!

 

I have a used 600 with a new kit in it..but you might want to do a jet change for your combo

 

vfast - how much for the 600? A buddy of mine may be looking for one sometime in the near future.

 

for you..200 for him 95.00 *L*

 

Summit should sell sight plugs

 

it's not a sight plug

 

ohhhhh...the plugs on thebowls themselves...duh!!! sorry... <edited><editID>Black Horse</editID><editDate>37916.8641550926</editDate></edited>