I hooked up the wiring for my CDC light bar per the instructions yet the LEDs will not light up. I tried hooking up a 9V battery and the lights go on just fine. Any ideas? I was thinking of taking out the LEDS but wasn't sure how to do it. I'm thinking there is a short somewhere, but I am unsure at this point. I found the solid green wire and the big Black wire and put a test light to it, and it lights up the test light, but again the LEDs will not work. I also tried reversing the wires because of polarity issues with the led and that didn't work either. Please I need help, I've been working this problem for two days.

Thanks