I want to do some upgrades to my 99 Mustang GT, for my senior project at school and i need some things that arent too expensive and that arent that hard 2 install. But do you guys have any seggustions for me ? both apperence and techinal things

 

well i dont exactly have an answer for you, im just curious what kind of project this is... my senior project had to be on career options...

also, do you have a budget?

 

cold air intake, easy 1 hour project


thats the only thing thats just straight up easy to install on your own
you could go further and get given common upgrades but would
have to get a pro to do that

 

To get about the same gains with NO outlay of cash you can modify your existing intake.
Start by trimming the air silencer.It's the rubber tube-like thing on the side of the airbox.Cut it so the opening is larger than the T/B opening with the top being left longer than the bottom and the front longer than the rear.The only reason for this is to keep loose dirt from being able to jump in by gravity.
The MAF screen can come out next.Just remove this screen and replace the O-ring and put it back together.This mod leans the mix out just a little and I understand that's pretty much what a bigger MAF does anyway.
Both of these are totally free and will give a lift in fuel aconomy of about one mpg.
A high flow air filter round out the combination but adds about $50 to the bundle.

The windshield wiper mod is one I like too.
Just remove the wiper arms and set them one notch lower on the shafts.This gives a cleaner appearance to the car.(I think)

 

should take no where near an hour to install a cai.

everything on these carsis easy to work on.

OP: any mods done to the car already?

 

945LSTANG

i was saying cai is about an hour project for someones very first mod they are doing by hand
mine took me that long but now since i know how to do it i could do it in 15 min

plus missouri college has a sick athletic complex