OE Wheels is your Sponsor
12-19-2008, 06:11 PM
#11
Former Sponsor
Thread Starter
Join Date: Dec 2008
Location: Florida
Posts: 421
Good Question, blackS197. We carry the 10th anniversary deep dish wheels in 17x9 and 17x10 in 4 and 5 lug. It's such a new design for us, we need to see how it goes before we think about investing in larger sizes.
12-19-2008, 06:23 PM
#12
Former Sponsor
Thread Starter
Join Date: Dec 2008
Location: Florida
Posts: 421
8178A, another good question. Like most injection fed aluminum wheels, our wheels are manufactured overseas. The wheels are manufactured in an original equipment plant, to the highest standards of engineering specification. They are DOT, JWL, VIA and TUV approved. They are side impact and load bearing tested. They are manufactured with the highest quality A-365.2 virgin aluminum.
12-19-2008, 06:40 PM
#13
5th Gear Member
Join Date: Feb 2005
Location: Anaheim, California
Posts: 4,205
Hello Lance,
Welcome to the forum. So, bring on the specials!! I have been eyeing the Anthricite Bullitts you posted above, for some time on E Bay. They would look great on my Mineral Grey....
Also, I sent a question but never got a reply. Any chance you would have the rims I mentioned above, done in the Bullitt Dark Argent, with the same machined lip??
Looking forward to doing business with you.....
Regards,
Mike
Welcome to the forum. So, bring on the specials!! I have been eyeing the Anthricite Bullitts you posted above, for some time on E Bay. They would look great on my Mineral Grey....
Also, I sent a question but never got a reply. Any chance you would have the rims I mentioned above, done in the Bullitt Dark Argent, with the same machined lip??
Looking forward to doing business with you.....
Regards,
Mike
12-19-2008, 07:39 PM
#14
Former Sponsor
Thread Starter
Join Date: Dec 2008
Location: Florida
Posts: 421
Hey mlcrycc, the specials are coming! 
Sorry if you did not receive a response through eBay. There are several reasons why this could happen ranging from your ebay settings to our email being identified as junk mail. Please feel free to call us or email me directly if you ever run into that again.
Regarding the finish - usually we select one from the group: gunmetal, anthracite, argent. We don't have the ability to change the finish on one set. We would have to produce about a thousand wheels for that. The good news is that as we become acclimated with the forum, we will be able to listen to what you guys have to say and incorporate your wants into our decision making... Who knows, maybe mlcrycc picks the next finish!
Sorry if you did not receive a response through eBay. There are several reasons why this could happen ranging from your ebay settings to our email being identified as junk mail. Please feel free to call us or email me directly if you ever run into that again.
Regarding the finish - usually we select one from the group: gunmetal, anthracite, argent. We don't have the ability to change the finish on one set. We would have to produce about a thousand wheels for that. The good news is that as we become acclimated with the forum, we will be able to listen to what you guys have to say and incorporate your wants into our decision making... Who knows, maybe mlcrycc picks the next finish!
12-19-2008, 08:24 PM
#18
Former Sponsor
Thread Starter
Join Date: Dec 2008
Location: Florida
Posts: 421
WifesGT2006, we have replica fr500s, saleens, 98 cobra Rs, bullets, 10th anniversary - 4 lug, 5 lug, 5 lug '05 offset, with and without rivets, deep dish, 17, 18 and 20".. Many, many variations.. But we have not manufactured the Mach 1 rims.
Again, thanks for the greetings from all of you.
Again, thanks for the greetings from all of you.
