t5 rebuild help :( please
12-24-2008, 06:45 PM
#1
1st Gear Member
Thread Starter
Join Date: Jan 2008
Posts: 86
t5 rebuild help :( please
I took apart my t5 to replace 2nd gear. But thats not the problem lol. Everything was going back together just fine but..... I didnt mark the way they go back 
. My problem is the sleeve synchronizer for 3rd - 4th. I dont know which way it goes back. Every manual says to put it back the way u marked it, but what if you didnt mark it lol, then what? Its number 80 in the diagram. It has a factory mark on it, a X on one side.
. My problem is the sleeve synchronizer for 3rd - 4th. I dont know which way it goes back. Every manual says to put it back the way u marked it, but what if you didnt mark it lol, then what? Its number 80 in the diagram. It has a factory mark on it, a X on one side.
12-24-2008, 06:47 PM
#2
1st Gear Member
Thread Starter
Join Date: Jan 2008
Posts: 86
12-26-2008, 07:26 PM
#3
1st Gear Member
Thread Starter
Join Date: Jan 2008
Posts: 86
t5 problem pics
There is some links to pictures of sleeve..... Im just not sure which way it goes back, notice on picture has a side view, one side of sleeve has a slight slope to it unlike the other. there is a x on the other side, not side with slope
Thread
Thread Starter
Forum
Replies
Last Post