General Tech Ask model specific questions in the appropriate category below. All other general questions within.

OnDemand 5 - Repair help for you.

Thread Tools
 
Search this Thread
 
Old Jan 19, 2014 | 06:27 PM
  #101  
simon12's Avatar
simon12
 
Joined: Jan 2014
Posts: 3
From: n/a
Default

Great. Thanks for sharing...
Old Jan 19, 2014 | 09:23 PM
  #102  
SyNdicateZ's Avatar
SyNdicateZ
3rd Gear Member
 
Joined: Feb 2011
Posts: 994
From: Mass
Default

How bout u tell us what app this is..
Old Aug 8, 2014 | 01:25 PM
  #103  
ric folsom's Avatar
ric folsom
 
Joined: Aug 2014
Posts: 1
From: s.c.
Default

need a/c help. if i jump the compressor it will cool. if i jump the LPS it wont come on. it has a new cluch, a a/c switch and refrigerant. also i only have to put the hot wire to the compressor.
Old Jul 12, 2018 | 11:08 AM
  #104  
jacktking1's Avatar
jacktking1
 
Joined: Jul 2018
Posts: 1
From: ca
Default

hello my name is jack and i have a long winded wuestion for anyone who can help i have a 2005 ford mustang 4.0L v6 automatic small history engine has been replaced 3 times i am the second owner of this car the car sat in a state of none running i did a tune up on the car new spark plugs wires coilpack and oil change car started right up but was un driveable due to a major hesitation when i hit the gas pedal so the check engine light is on there where 3 codes 1 for a rich mixture 1for a lean mixture and 1 for a faulty fuel pressure sensor so i replaced the fuel pressure sensor and the fuel filter it got rid of the pressure sensor code but the other 2 codes remain and car still stutters when starting and accelerating and idleing i need help guys please and thank you all
Old Aug 26, 2018 | 11:12 PM
  #105  
mikewill29's Avatar
mikewill29
 
Joined: Aug 2018
Posts: 1
From: Alberta
Default help with my c4 transmission

Can anyone help me I’m rebuilding my c4 transmission from my 67 mustang and a pin fell out and I’m not sure where it goes and the repair manual does not show it
Old Nov 17, 2018 | 01:32 AM
  #106  
hanzo99999's Avatar
hanzo99999
 
Joined: Oct 2018
Posts: 16
From: WA
Default

Hi! I have a Ford Mustang 2005 V6.

I accidentally hit my rear bumper driving through my university campus, when i made a right turn i heard a big THUMP and i checked it. I'm just curious on what kind of damage i have caused. My bumper took the hit yes, I just want to make sure before winter if I should do anything about it. I'm guessing from the picture it looks a bit misaligned after. Is there anything underneath the mustang on the rear bumper right side end that I should look for( damaging any IMPORTANT car parts)?

Just wondering. My friend told me its just the bumper that got moved a little bit. And here:

Here is the side that got hit: Its from the back of the car on the right
https://imageshack.com/a/img922/3439/x7SWzk.jpg
https://imageshack.com/a/img922/5001/XVyvWb.jpg

Here is the perfect aligned one on the left:
https://imageshack.com/a/img923/1046/JUR1cs.jpg

What are some of the concerns that I might stumble upon? I checked beneath it and see nothing out of place.
Old Jan 7, 2019 | 10:46 AM
  #107  
spower's Avatar
spower
 
Joined: Jun 2011
Posts: 39
From: CA
Default

You have anything that tells how to repair the headliner in my 05 conv V6 4.0? See pic......and thanks!!
Old Nov 7, 2019 | 11:38 PM
  #108  
daniel foster's Avatar
daniel foster
 
Joined: Nov 2019
Posts: 3
From: Pennsylvania
Default NEED HELP WITH ANTI THEFT LIGHT 2000 3.8 MUSTANG

SO I BOUGHT THE CAR FOR MY DAUGHTER THE GUY TOLD US IT NEEDED A BATTERY AND A FUEL PUMP I'M NO STRANGER TO MECHANICS BUT I'M NOT THAT ADVANCED WHEN IT COMES TO THE ECU OR THE ANTI THEFT SYSTEM I INSTALLED THE FUEL PUMP AND NEW BATTERY LIGHT BLINKS . UTUBED IT TRIED THE TURN BACK THE KEY TRICK NO HELP THEN TRIED THE JUMP THE ECU WITH THE POSITIVE HOT TIED TO A NON POSTED GROUND STILL NO HELP I'M COMING TO A DEAD LINE SHE WANTS HER CAR RUNNING BY THE TIME SHE COMES HOME FROM COLLAGE IN LESS THEN 2 WEEKS I PROMISED HER I'D HAVE IT ATLEAST RUNNING AND I'M ALL OUTTA OPTIONS CAN SOMEBODY PLEASE HELP I'D REALLY LOVE TO SHOW HER HER CAR WORKS THANKS FOR LISTENING
Old Feb 28, 2022 | 03:20 PM
  #109  
Ployer56's Avatar
Ployer56
 
Joined: Feb 2022
Posts: 3
From: California
Default Driver seat not working

I have a 2002 mustang v6.
I am having issue with he driver seat it does not move front or back.
The seat does not have a switch to move and it does not have a lever to move front or back.
Old Jul 18, 2024 | 09:19 PM
  #110  
MustangSally84's Avatar
MustangSally84
 
Joined: Jul 2024
Posts: 2
From: SC
Default

Originally Posted by Juno
Hello, i got an application that shows everything about how to repair something...
I got database of all cars between 1981 - 2007.

For example, you wanna remove clutch in 1998 Mustang with 3.8 V6 Engine:




Of course you got pics how it looks:



Etc.

Just give me:

Your Car Model: EX. Ford Mustang GT
Year: EX. 1998
And what you need to know =]

I will post links with screens in this post =]

Take care
Replacing the Neutral safety switch 2007 Mustang
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Megaman
General Tech
0
Jun 12, 2019 06:56 PM
djd2392
V6 General Discussion
25
Apr 17, 2012 12:09 PM
rzez65
V6 (1994-2004) Mustangs
8
Aug 3, 2010 02:24 PM
Slothcat
V6 General Discussion
25
Jun 24, 2009 07:03 PM
mgd_only
New Member Area
1
Sep 28, 2007 01:25 AM




All times are GMT -5. The time now is 10:10 PM.