Help removing computer & Harness
#1
Help removing computer & Harness
I will be removing the harness and computer and all emissions and air from my 89 GT convt. and was looking for any pointers about going about to do this with keeping what I need intact?
I will be running a carb and need any pointers to switching over and ending up with a clean conversion. I want anything and everything I don't need out.
Any help would be appreciated, I have posted Questions a few times and have yet to get a response so I figured I would try again..
Ask me to build a motor/trans or rearend all day long but wiring is not my thing.
thx...SC
I will be running a carb and need any pointers to switching over and ending up with a clean conversion. I want anything and everything I don't need out.
Any help would be appreciated, I have posted Questions a few times and have yet to get a response so I figured I would try again..
Ask me to build a motor/trans or rearend all day long but wiring is not my thing.
thx...SC
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM